[33] Ouk Sub Lee, Guan Hee Kim, Myun Soo Kim, Jai Sug Hwang

"Dynamic Deformation Behavior of Aluminum Alloy Under High Strain Rate Compressive/Tensile Loading"
KSME International Journal, Vol. 17, No. 6, p.787-795, 2003. 6

[32] Ouk Sub Lee, Kyoung Joon Kim

"Dynamic Compressive Deformation Behavior of Rubber Materials"
Journal of Materials Science Letters, Vol.22, pp.1157-1160, 2003

[31] Ouk Sub Lee, Myun Soo Kim, Kyoung Joon Kim, Si Won Hwang, Kyu Sang Cho

"Dynamic Deformation Behavior of Rubber under High Strain Rate Compressive Loading"
International Journal of Modern Physics B, Vol. 17, No. 8&9 (2003) 1415-1420

[30] 이억섭, 황재석, 신동철

"A Study on the Initial Crack Curving Angle of Isotropic/Orthotropic Bimaterial"
KSME INTERNATIONAL JOURNAL Vol.16 No.12 pp.1594 1603 2002.12.

[29] 이억섭, 편장식

"Failure Probability of corrosion Pipeline with Varying Boundary Condition"
KSME INTERNATIONAL JOURNAL VOL.16 No.7 pp.889 895 2002.7.

[28] Ouk Sub Lee, Jae Chul Park, Hai Long Yin, Kwi Hwan Byun

"Dynamic interface crack propagating along a line between two holes"
KSME International Journal Vol. 15, No. 2, pp: 166-173, 2001. 02(SCI E)

[27] Ouk Sub Lee, Jae Chul Park, Gyu Hyun Kim

"Dynamic Mixed Mode Crack Propagation Behavior of Structural Bonded Joints"
KSME International Journal Vol. 14, No. 7, (2000) pp: 752-763

[26] O. S. Lee, J. Y. Lee, G. H. Kim, H. S. Hwang

"High Strain-Rate Deformation of Composite Materials Using a Split Hopkinson Bar Technique" Key Engineering Materials Vol. 183-187, Part 1, (2000) pp: 307-312

[25] O. S. Lee, E. Kim, H. L. Yin, K. S. Kim, C. H. Jo, C. W. An

"A Study on Dynamic Fracture in stiffened Cylinder Subjected to a Strong Acoustic Wave" Key Engineering Materials Vol. 183-187, Part 1, (2000) pp: 349-354

[24] O. S. Lee, J. H. Choi, K. S. Kim, C. H. Jo, C. W. An

"A Study on Stress Wave Propagation in Stiffened Cylinder Subjected to a Strong Acoustic Wave" Key Engineering Materials Vol. 183-187, Part 1, (2000) pp: 481-486

[23] Ouk Sub Lee, Albert S. Kobayashi

"Dynamic Mixed Mode Crack Propagation Behavior of Structural Bonded Joints"
Key Engineering Materials Vol. 183-187, Part 1, (2000) pp: 325-330

[22] O. S. Lee, J. S. Hawong, D. C. Shin, H. J. Lee, J. K. Ha

"A Study on the Development of the Dynamic Photoelastic Experimental Method for Isotropic/Orthotropic Bimaterials" Key Engineering Materials Vol. 183-187, Part 1, (2000) pp: 283-288

[21] Ouk Sub Lee, Zhi Wei Chen

"Issues When Estimating Fatigue Life of Structures"
International Journal of the Korea Society of Precision Engineering Vol. 1, No. 2 (2000.12) pp: 43-47

[20] Ouk Sub Lee, Ho Jung Kim

"Effect of external corrosion in popeline of failure prediction"
International Journal of the Korea Society of Precision Engineering Vol. 1, No. 2 (2000.12) pp: 48-54

[19] Ouk Sub Lee, Gyu Hyun Kim, Si Won Hwang

"Expeimental study on neck injury in low speed frontal and rear-end collisions"
KSME International journal Vol. 14, No. 11, pp: 1232-1243 2000.11

[18] Ouk Sub Lee, Guan Hee Kim

"Thickness effects on mechanical behavior of a composite material(1001P) and polycarbonate in Split Hopkinson Pressure Bar technique"
Journal of Materials Science Letters Vol. 19, pp: 1805-1808, 2000.10

[17] Ouk Sub Lee, Kee young Nam

"Theoretical Photoelastic Stresses in Three Dimensional Body with Elastic Contact"
KSME international Journal, Vol. 13, No. 4, 1999, pp. 321-331,

[16] Ouk Sub Lee, Seon Soon Choi

"Effect of Circular Cavity on Maximum Equivalent Stress and Stress Intensity Factor at a Crack in Buried Pipeline" KSME international Journal Vol. 13, No. 4, (1999) pp. 350-357,

[15] Ouk Sub Lee, D. Y. Kim
"Crack-Arrest Phenomenon of an Aluminum Alloy"
Mechanics Research Communications Vol. 26, No. 5, (1999) pp. 575-581 (SCI)

[14] Ouk Sub Lee, Zhi Wei Chen
"A new Crack Growth model for life prediction under random loading"
KSME International Journal Vol. 13-12 (1999) pp: 905-911 (SCI E)

[13] O. S. Lee, J. H. Chong, S. S. You, S. S. Choi
"A Very High Strain Rate Compression Test Using a Modified
Split Hopkinson Pressure Bar Technique"
Key Engineering Materials Vols.145-149 (1998.1) : pp. 343∼348.

[12] Ouk Sub Lee
"Fatigue Life Prediction by Statistical Approach Under Constant Amplitude Loading"
KSME Journal, Vol. 12, No. 1 (1998) : pp. 67∼72.

[11] Ouk Sub Lee, Seung Suk LEE, Ju Ho Chung and Hee Soo Kang
"Dynamic Deformation Under a Modified Split Hopkison Pressure Bar Experiment"
KSME International Journal, Vol. 12, No. 6 (1998) : pp. 1143-1149

[10] Ouk Sub Lee, Gyu Hyun Kim, Seung Suk Yoo
"Experimental Study on Impact Absorbing Performance of Motorcycle Helmets"
KSME Journal, Vol. 11, No. 3 (1997.6) : pp. 292∼299.

[9] Ouk Sub Lee
"Residual Stress Interference by Two Micro-Vickers Indentations"
KSME Journal, Vol. 11, No. 4 (1997.8) : pp. 379∼385.

[8] Ouk Sub Lee, Seong Kyeong Hong
"Dynamic Fracture Characteristics of Highly Brittle Materials by Using
Instrumented Charpy Impact Test"
KSME Journal, Vol. 11, No. 5 (1997.10) : pp. 513∼520.

[7] O. S. Lee, W. K. Park, S. K. Hwang and S. K. Hong
"Dynamic Crack Initiation Toughness by Instrumented Charpy
Impact Test in Highly Brittle Materials"
ASME Journal , PVP-Vol. 300 (1995.7) : pp. 981∼989.

[6] Ouk Sub Lee, David T.Read
"Micro-Strain Distribution Around a Crack Tip by Electron Beam Moire Methods"
KSME Journal, Vol. 9, No. 3 (1995.9.) : pp. 298∼311.

[5] O. S. Lee and M. K. Han
"Measurement of Crack Propagation Velocity in Nuclear Pressure
Vessel Steel(SA516 gr.70)"
Int. of Pressure Vessels and Piping, Vol. 54 (1993) : pp. 415∼428.

[4] O. S. Lee, S. K. Hong and Y. S. Kim
"Revisit to the Determination of Stress Intensity Factors
and J-Integrals Using the Caustics Method"
Experimental Mechanics, Vol. 33, No. 2 (1993) : pp. 133∼138.

[3] O. S. Lee and S. K. Hong
"Determination of Stress Intensity Factors and J-Integrals
Using the Method of Caustics"
Engineering Fracture Mechanics, Vol. 44, No. 6 (1993) : pp. 981∼989.

[2] J. U. Cho, O. S. Lee And S. C. Kim
"Fatigue Crack Propagation between Holes and Particles"
Int. J. of Fracture, Vol. 56 (1992) : pp. 299∼316.

[1] O. S. Lee and J.H. Williams, Jr
"Ultrasonic Wave Characterization of Polymers"
Material Evaluation, Vol. 49, No. 3 (1991) : pp. 351∼355.